Tes Automatic Screw Feeder With Orbit Adjustable (TES)

Automatic screw feeder with adjustable rail TES series
Analog of KILEWS screw feeder, but with very competitive price
Features:
1. Applicable to a variety of specifications of screws
M1.0 - M5.0 adjustable (1.0 1.2 1.4 1.7 2.0 2.3 2.6 3.0 3.5 4.0 5.0) can be the use of special screws, 1: 1 short screws and screws with washers
2. Adjust rail conveniently, the rail can be pulled out to be adjusted freely.
3. Easy to understand, easy to operate. No screw block phenomenon.
4. Screws roll in the rotary drum to fall into the outlet. Screws not falling into rail will be moved to rotary drum and enter next cycle.
5. The machine working speed can be adjusted by adjusting the vibration strength to change the speed.
The screw reaching the dropout position will not vibrate, which will not disturb the working efficiency.
6. Failure alarm function available
7. Feeding and vibration drive is controlled independently
8. The ideal delay time can be set freely.
9. Under abnormal working status, the machine will start failure alarm.
10. Operation is as easy as other screw machine!
11. When pick up screws, just need to aim the screw head position, put the screw driver tip into the guide bearing, slide along the guide bearing, and pull down the screw towards your body position.

Parameters
Applied screws For various types of screws including
Screw with washer (up to L = 20MM)
Output speed 2 drops / sec
Input voltage AC 220V
Product Size 180mm * 125mm * 150mm (L * W * H)
Weight about 1.5kg (N. W)
Accessories Operation manual, Hex wrench,
DC power supply (input 180-220V Output DC 12V)